PICJazz 20PIN Model 1

PICJazz 20PIN board is designed to be used both as the PIC microcontroller learning and development board. The PICJazz 20PIN board is stand alone microcontroller module equipped with the latest Microchip high performance PIC16F690 microcontroller that can be used for wide range of applications including embedded controller, remote data logger, robotics and much more.

The PICJazz 20PIN features:

• High performance nanoWatt technology Microchip PIC16F690 microcontroller with 7K bytes Self-Programmable Flash, 256 bytes EEPROM and 256 bytes Internal SRAM. Peripherals include: one 8 bit and one 16 Bit Timers/Counter, four PWM channels, 12 channels 10 bit ADC, USART, Master/Slave SPI and I2C
• Could be used with other 8,14 and 20 Pin 8-bit Microchip PIC microcontroller families such as PIC12F683, PIC16F684, PIC16F677, PIC18F14K22 and PIC18F14K50 (USB)
• Designed to be used as the PICAXE microcontroller development platform such as PICAXE 8M, 14M, 20M and 20×2 families
• Four 3mm blue LED attached to the Port C
• One Reset Button
• One configurable port digital user switch
• One configurable port user trimmer potentiometer (trimport) for analog input
• High speed instruction throughput using internal 8 MHz (PIC16F690) and 16MHz (PIC18F14K50) oscillator
• RS232 Level converter for communicating with other equipment such as PC
• Separate RS232 port to download the program using PICAXE Programming Editor from Education Revolution Ltd
• Fully supported by Microchip MPLAB IDE v8.x, Microchip C18, HI-TECH C PRO PIC10/12/16 MCU Families and HI-TECH PIC18 compiler
• Standard Microchip ICSP Port to re-programmed the PICJazz 20PIN board using Microchip PICkit2 programmer
• Example project using PICJazz 20PIN board could be found on http://www.ermicro.com/blog
• The PICJazz 20PIN board demo program source code is include in the CDROM; this program demonstrate the capability of the PICJazz 20PIN board such as accessing the RS232 port, using the user switch, using the user analog input (trimport) and running the four 3mm blue LED.

Accessories:

• 3 x AA Battery Holder with on/off switch (battery not include)
  
• One RS232 Cable
• 4 x Plastic PCB Holder
• 2 x female to female Connector Cable
  
• 1 CD User Guide and Program Samples